The AutoTest Headlight Align is a professional quality beam aligner suitable for all kinds of headlamps (high, low, fog including XENON and LED lamps). It is supplied with assembly, operation and calibration manuals and declaration of conformity.
4 Easy Testing Steps with the AutoTest Trailer Socket Tester
STEP 1:
Insert the 7pin plug (or 13pin adapter) into the Trailer socket at the rear of the vehicle.
STEP 2:
Holding the handset return to the vehicle driver’s seat.
STEP 3:
Ensuring the vehicle is in a stationary position, with the gears in neutral and the hand brake on. Turn on ignition.
STEP 4:
Without touching the self-test button, by activating the relevant control (for example the tail lamp) the corresponding lamp on the test device will illuminate, giving a positive indication of the continuity of the output. This should be repeated for all six controls. If one or more lights fail to illuminate this indicates a fault with the continuity of output from one or more of the pins.
Operating conditions
| Ambient Temperature | -10ºC to 40ºC |
| Relative Humidity | Less than 95% |
| Atmospheric Pressure | 70.0KPa – 106.0KPa |
| Power supply | DC9V battery or 12v car battery or cigarette lighter (maximum input voltage 25V) |
| Floor | The instrument and the vehicle must be placed at the same surface, Gradient and out of level shall not exceed 3%. |
Measuring range
| Central elevation of the headlight | 30cm – 1,400cm |
| Luminous intensity | 0 – 100,000cd Optic axis deviation of high beam and low beam |
| Left – Right | L 4%/10m – R 4%/10m (L 40cm/10m – R 40cm/10m) |
| Up – Down | U 2%/10/m- D 4%/10m (U 20cm/10m – D 40cm/10m) |
Other
| Measuring distance | 500cm |
| Power consumption | <0.5W |
| Net Weight | 26kg |
No Upgrades
4 Easy Testing Steps with the AutoTest Trailer Socket Tester
STEP 1:
Insert the 7pin plug (or 13pin adapter) into the Trailer socket at the rear of the vehicle.
STEP 2:
Holding the handset return to the vehicle driver’s seat.
STEP 3:
Ensuring the vehicle is in a stationary position, with the gears in neutral and the hand brake on. Turn on ignition.
STEP 4:
Without touching the self-test button, by activating the relevant control (for example the tail lamp) the corresponding lamp on the test device will illuminate, giving a positive indication of the continuity of the output. This should be repeated for all six controls. If one or more lights fail to illuminate this indicates a fault with the continuity of output from one or more of the pins.
Operating conditions
| Ambient Temperature | -10ºC to 40ºC |
| Relative Humidity | Less than 95% |
| Atmospheric Pressure | 70.0KPa – 106.0KPa |
| Power supply | DC9V battery or 12v car battery or cigarette lighter (maximum input voltage 25V) |
| Floor | The instrument and the vehicle must be placed at the same surface, Gradient and out of level shall not exceed 3%. |
Measuring range
| Central elevation of the headlight | 30cm – 1,400cm |
| Luminous intensity | 0 – 100,000cd Optic axis deviation of high beam and low beam |
| Left – Right | L 4%/10m – R 4%/10m (L 40cm/10m – R 40cm/10m) |
| Up – Down | U 2%/10/m- D 4%/10m (U 20cm/10m – D 40cm/10m) |
Other
| Measuring distance | 500cm |
| Power consumption | <0.5W |
| Net Weight | 26kg |
No Upgrades
View these related products and get the most out of the AutoTest range.
From humble beginnings in 1983 we have been working with governments in many areas of vehicle safety.
From humble beginnings in 1983 we have been working with governments in many areas of vehicle safety.
Auto Test products are sold in 50 countries across the world. Find your local distributor.
