AutoStop Maxi Brake Meter

AutoStop Maxi Brake Meter

An efficient diagnostic and compliance tool, designed to test Service and Emergency brakes. Compliant with roadworthy regulations around Australia

AutoStop Maxi Brake Meter measures average and peak deceleration, stopping distance, test speed and the brake pedal pressure required to stop a vehicle.

There are 4 easy testing steps with AutoStop Maxi:

STEP 1
Secure the AutoStop Maxi in the vehicle with its strap or optional floor-mounted magnet in a horizontal position with the lid open and facing forward. Attach the load cell to the brake pedal to test the service brakes.

STEP 2
Turn on the AutoStop Maxi and enter examiner’s ID and the vehicle’s registration number. Press Start. Accelerate the vehicle to the required speed.

STEP 3
Apply the brakes by pressing your foot on the load cell attached to the brake pedal, until the vehicle is stationary.

STEP 4
After the vehicle has come to a stop, the AutoStop Maxi evaluates the brake performance and displays and prints the test results.

  • Calculates and displays average and maximum deceleration, distance to stop, test speed and pedal-force required to stop the vehicle
  • Calculates and displays MFDD (Mean Fully Developed Deceleration) in accordance with ECE Reg 13
  • Prints two original reports (one for the customer, the other for the examiner) as a permanent record of the test results, date, time, examiner’s ID number and the vehicle’s registration/VIN number.
  • Price Competitive
  • Lightweight (3.0kg), compact (123 x 267 x 246mm) and portable
  • Robust construction that is water resistant and petrol, chemical and acid proof
  • Conventional (QWERTY) keypad lay-out, with tactile membrane cover.
  • LCD display
  • Adjustable display control
  • Both metric and imperial units of measurement
  • Built-in integrity check
  • Rechargeable, sealed, acid-gel battery, with low battery level indicator and automatic shut-down.
  • Internationally traceable Calibration (NATA)
  • 24-month calibration interval
  • 12-month warranty
  • Low-cost spare parts, accessories, and consumables
  • Comprehensive after-sales service and assistance
  • Internet support hotline
  • Position acquisition time – 1 Min Maximum
  • Software configurable

Optional features:

  • GPS or Glonass or Galileo positioning receiver, providing longitude and latitude.
  • USB and Bluetooth interface
  • Stores over 100 test results with USB or Bluetooth
  • Numerous user-entry hardware and software options
  • Graphical output

Input:

  • Load Cell: rated to less than ±1N, -1000N
  • Accelerometer: rated to less than ±1% over 0-1.5g

 

Output:

  • Display: 8-character LCD
  • Built-in printer (Dot Matrix)

 

Analysis of test results:

  •  Average and maximum deceleration
  • Test speed
  • Stopping distance
  • Time to stop
  • Foot pedal force

 

Power source:

  • 12V, 1.9AH, sealed-lead acid rechargeable battery

 

Printer:

  • Paper: maximum diameter: 48mm; width: 44.5mm (±0.5mm)
  • Ribbon: Epson type ERC-05
  • Ribbon life: equivalent to 2 paper rolls
  • Print speed: 1.0 line/sec

Passenger Cars, Light good Vehicles, Heavy Good Vehicles, Buses, Light Rail vehicles, Transit Vehicles

Gps, Bluetooth and USB

Product Downloads

Click the buttons below for FAQ, manuals and brochures.


New AutoStop Maxi Software Update 1.80 (for v9.13 & above)
FAQ AutoStop Maxi
AutoStop Maxi+GPS Brochure
AutoStop Maxi User Manual
AutoStop Maxi Software v1.4 (for before v9.13)
AutoStop Maxi Brochure

AutoStop Maxi Brake Meter measures average and peak deceleration, stopping distance, test speed and the brake pedal pressure required to stop a vehicle.

There are 4 easy testing steps with AutoStop Maxi:

STEP 1
Secure the AutoStop Maxi in the vehicle with its strap or optional floor-mounted magnet in a horizontal position with the lid open and facing forward. Attach the load cell to the brake pedal to test the service brakes.

STEP 2
Turn on the AutoStop Maxi and enter examiner’s ID and the vehicle’s registration number. Press Start. Accelerate the vehicle to the required speed.

STEP 3
Apply the brakes by pressing your foot on the load cell attached to the brake pedal, until the vehicle is stationary.

STEP 4
After the vehicle has come to a stop, the AutoStop Maxi evaluates the brake performance and displays and prints the test results.

  • Calculates and displays average and maximum deceleration, distance to stop, test speed and pedal-force required to stop the vehicle
  • Calculates and displays MFDD (Mean Fully Developed Deceleration) in accordance with ECE Reg 13
  • Prints two original reports (one for the customer, the other for the examiner) as a permanent record of the test results, date, time, examiner’s ID number and the vehicle’s registration/VIN number.
  • Price Competitive
  • Lightweight (3.0kg), compact (123 x 267 x 246mm) and portable
  • Robust construction that is water resistant and petrol, chemical and acid proof
  • Conventional (QWERTY) keypad lay-out, with tactile membrane cover.
  • LCD display
  • Adjustable display control
  • Both metric and imperial units of measurement
  • Built-in integrity check
  • Rechargeable, sealed, acid-gel battery, with low battery level indicator and automatic shut-down.
  • Internationally traceable Calibration (NATA)
  • 24-month calibration interval
  • 12-month warranty
  • Low-cost spare parts, accessories, and consumables
  • Comprehensive after-sales service and assistance
  • Internet support hotline
  • Position acquisition time – 1 Min Maximum
  • Software configurable

Optional features:

  • GPS or Glonass or Galileo positioning receiver, providing longitude and latitude.
  • USB and Bluetooth interface
  • Stores over 100 test results with USB or Bluetooth
  • Numerous user-entry hardware and software options
  • Graphical output

Input:

  • Load Cell: rated to less than ±1N, -1000N
  • Accelerometer: rated to less than ±1% over 0-1.5g

 

Output:

  • Display: 8-character LCD
  • Built-in printer (Dot Matrix)

 

Analysis of test results:

  •  Average and maximum deceleration
  • Test speed
  • Stopping distance
  • Time to stop
  • Foot pedal force

 

Power source:

  • 12V, 1.9AH, sealed-lead acid rechargeable battery

 

Printer:

  • Paper: maximum diameter: 48mm; width: 44.5mm (±0.5mm)
  • Ribbon: Epson type ERC-05
  • Ribbon life: equivalent to 2 paper rolls
  • Print speed: 1.0 line/sec

Passenger Cars, Light good Vehicles, Heavy Good Vehicles, Buses, Light Rail vehicles, Transit Vehicles

Gps, Bluetooth and USB

Product Downloads

Click the buttons below for FAQ, manuals and brochures.


New AutoStop Maxi Software Update 1.80 (for v9.13 & above)
FAQ AutoStop Maxi
AutoStop Maxi+GPS Brochure
AutoStop Maxi User Manual
AutoStop Maxi Software v1.4 (for before v9.13)
AutoStop Maxi Brochure

Our History

From humble beginnings in 1983 we have been working with governments in many areas of vehicle safety.

Our History

From humble beginnings in 1983 we have been working with governments in many areas of vehicle safety.

Our Distributors

Auto Test products are sold in 50 countries across the world. Find your local distributor.